College Baseball Recruiting Guidelines for Players
What college coaches look for at every position and level, plus a year-by-year plan to get there. From Diamond Edge Recruiting, powered by Trugo16 Athletics in Fishkill, NY.
Parents: your guide is here: College Recruiting Guide for Parents.
What College Coaches Look For
College scouts grade arm strength, fielding range, speed, and hitting for power and average. They are projecting how you will play at 18 to 21 years old, where the game is much faster than high school. Strong numbers against weak competition don’t tell a coach much, so get in front of the best competition you can.
Coaches also watch how you carry yourself before the game, between innings and after it, and they ask your coaches how hard you train. Talent gets you noticed. Work ethic is what you control, and it often decides who gets the offer.
Recruiting Benchmarks by Position
Use these numbers to see how you compare with players who compete in college. They are guidelines, not rules: coaches recruit the best fit for their team, and there are always exceptions. A Trugo16 player evaluation gives you verified numbers and an honest projection.
Pitchers
| Division I | Division II | Division III and NAIA | Junior college | |
|---|---|---|---|---|
| Velocity | 84+ mph consistently, up to 95+ | 82–90+ mph | 77–82 mph | 80 mph consistently |
| Pitches | Command of 3 or more | One off-speed pitch plus one more to spots | One off-speed pitch, developing another | — |
| ERA | Under 2.00 | Under 3.00 | 2.50–3.50 | Under 4.00 |
| Strikeouts | 1+ per inning | About 1 per inning | About 1 strikeout per walk | Up to 1 per inning |
| Walks | Fewer than 1 per 2 innings | About 1 per 2 innings | — | — |
Catchers
| Division I | Division II | Division III and NAIA | Junior college | |
|---|---|---|---|---|
| Height | 6’1” | 6’0” | 5’11” | 5’10” |
| Weight | 185–200 lbs | 180 lbs | 180 lbs | 170 lbs |
| Pop time | 1.95 or faster | 2.0 or faster | 2.0–2.1 | 2.1 or faster |
| On-base % | .500 | .450 | .400 | .350 |
| Slugging % | .600 | .550 | .500 | .450 |
Pop times should be verified by a neutral source. Division I coaches also look closely at catch-and-throw mechanics, leadership and the ability to handle a whole pitching staff. Slugging assumes at least 2 at-bats per game.
First basemen
| Division I | Division II | Division III and NAIA | Junior college | |
|---|---|---|---|---|
| Height | 6’2”–6’6” | 6’0” or taller | 6’0” | 5’11” |
| Weight | 190–240 lbs | 180+ lbs | 180 lbs | 170 lbs |
| Power | 5–10 HR as a junior and as a senior | A few HR and many RBI as a junior and senior | 3+ HR, 25+ RBI | 2+ HR, 20+ RBI |
| On-base % | .500 | — | — | — |
| Slugging % | .750 | Shows power or the potential for it | — | — |
Third basemen
| Division I | Division II | Division III and NAIA | Junior college | |
|---|---|---|---|---|
| Height | 5’10”–6’3” | 5’9”–6’3” | 6’0” | 5’11” |
| Weight | 180–220 lbs | 170–220 lbs | 180 lbs | 170 lbs |
| Throwing velocity | 85–95 mph across the infield | 80+ mph and improving | — | — |
| Power | 5–10 HR as a junior and as a senior | 2+ HR as a junior and as a senior | 2+ HR, 25+ RBI | 2+ HR, 20+ RBI |
| On-base / slugging | .500 / .750 | .400+ / .400+ | — | — |
Middle infielders (SS and 2B)
| Division I | Division II | Division III and NAIA | Junior college | |
|---|---|---|---|---|
| Height | 5’8”–6’2” | 5’8”–6’2” | 5’11” | 5’10” |
| Weight | 165–190 lbs | 165–190 lbs | 170 lbs | 165 lbs |
| 60-yard dash | 6.5–6.8 sec | 6.9 or faster | 7.0 or faster | 7.1 or faster |
| Throwing velocity | 85–95 mph across the diamond | Low 80s+ from SS | 78+ mph from SS | Upper 70s from SS |
| On-base % | .500 | .450 | .400 | .350 |
| Slugging % | .600 | .550 | .500 | .450 |
60 times should be verified by a third party. The typical Division I middle infielder hits for a high average, steals a lot of bases and shows some power.
Center fielders
| Division I | Division II | Division III and NAIA | Junior college | |
|---|---|---|---|---|
| Height | 5’9”–6’2” | 5’11” | 5’11” | 5’10” |
| Weight | 175–210 lbs | 180 lbs | 180 lbs | 170 lbs |
| 60-yard dash | Under 6.7 sec | Under 6.9 | 6.9 or faster | 7.0 or faster |
| Throwing velocity | 87–95+ mph from the outfield | — | 80+ mph | 78+ mph |
| On-base % | .500 | .450 | .400 | .350 |
| Slugging % | .600 | .500 | .500 | .450 |
Corner outfielders
| Division I | Division II | Division III and NAIA | Junior college | |
|---|---|---|---|---|
| Height | 5’11” | 5’11” | 5’11” | 5’10” |
| Weight | 180 lbs | 180 lbs | 180 lbs | 170 lbs |
| 60-yard dash | Under 6.8 sec | Under 7.0 | 6.9 or faster | 7.0 or faster |
| Throwing velocity | 87+ mph (verified) | Low 80s+ and improving | 80+ mph | 78+ mph |
| Power | 5+ HR as a junior and as a senior; .750 slugging | Multiple HR as a junior and as a senior | .650 slugging | — |
| On-base % | .500 | — | .400 | — |
Slugging numbers assume at least 2 at-bats per game. Softball players: these benchmarks are for baseball. Contact us about softball recruiting.
Combine Metrics by Level: Exit Velocity, Bat Speed, 10, 30 and 60-Yard Times
Besides game stats, college coaches look at measurable tools from showcases, camps and evaluations. These are publicly available benchmarks for each level. Use them to set training targets, not as a verdict: sources measure in different ways and coaches recruit the whole player.
Hitting, speed and arm strength
| Top D1 (Power 4) | Mid-major D1 | Division 2 | D3 / NAIA | Junior college | |
|---|---|---|---|---|---|
| Max exit velocity (tee, BBCOR) | 95+ mph | 90+ mph | 85+ mph | 80+ mph | 85+ mph at top programs |
| Average bat speed (Blast) | About 70–72 mph | About 68–70 mph | 66–75 mph (college range) | 66–75 mph (college range) | 66–75 mph (college range) |
| 60-yard dash | 6.4–6.7 sec | 6.7–7.0 sec | 7.0–7.2 sec | 7.0–7.4 sec | 6.8–7.2 sec |
| Home to first (SS/CF; others) | 4.0–4.2; 4.2–4.4 | 4.4–4.6; 4.6–4.8 | 4.8–5.0; 5.0+ | 4.8–5.0; 5.0+ | 4.4–4.6; 4.6–4.8 |
| Infield velocity | 85–90+ mph | 80–87 mph | 78–83 mph | 75–80 mph | 75–80 mph |
| Outfield velocity | 87–95+ mph | 85+ mph | Low 80s+ | 80+ mph | 78+ mph |
| Catcher pop time | 1.85–1.95 | 1.95–2.05 | 2.00–2.10 | 2.05–2.15 | 2.10 or faster |
10-yard and 30-yard sprint splits
Showcases now time the 10 and 30-yard marks inside the 60 with laser gates, and the MLB Draft Combine runs a 30-yard sprint instead of the 60. No one publishes split standards by college division yet, so use these reference points:
- 10-yard split: top times at Prep Baseball showcases are about 1.65 seconds.
- 30-yard sprint: MLB draft prospects averaged 3.77 seconds at the 2023 Draft Combine; the fastest run about 3.5, and breaking 4.0 is a common goal.
Bat speed and hand speed (Blast Motion)
| Level | Bat speed | Peak hand speed |
|---|---|---|
| High school varsity | 60–70 mph | 20–26 mph |
| College | 66–75 mph | 21–27 mph |
| MLB | 66–78 mph | 23–29 mph |
Pitching
| Top D1 (Power 4) | Mid-major D1 | Division 2 | D3 / NAIA | Junior college | |
|---|---|---|---|---|---|
| Fastball velocity (RHP) | 90–95+ mph | 86–92 mph | 83–88 mph | 80–86 mph | 80+ mph |
| High school | College | MLB | |
|---|---|---|---|
| Average fastball spin (TrackMan) | 1,977 rpm | 2,148 rpm | 2,256 rpm |
| Average curveball spin (TrackMan) | 2,069 rpm | 2,340 rpm | 2,582 rpm |
Left-handers are often recruited a couple of mph below right-handers. Breaking balls typically sit about 6–8 and 14–15 mph below the fastball, and a D1 changeup about 16–18 mph below.
How to test so the numbers count
- Note how each number was measured. Tee, front toss and live BP read differently, and in-game exit velocity usually runs 5–10 mph below a tee max.
- Use laser timing for sprints; hand-timed 60s often read fast.
- Test with the same bat (BBCOR) and the same sensor or radar every time, and re-test every 3–4 months.
- Get verified numbers from a neutral source, like a showcase or a Trugo16 player evaluation.
Sources: Prep Baseball Report (Blast Motion and TrackMan data), Blast Motion, MLB Draft Combine, HitTrax, TopVelocity, GetRecruited and NCSA.
Your High School Recruiting Checklist
Freshman year: build the foundation
- Set a weekly routine for school, training, sleep and recovery
- Get a baseline skill and athletic evaluation
- Learn the differences between NCAA divisions, NAIA and junior college
- Save useful game video and verified stats
- Explore 5–10 colleges just to learn what you like
Sophomore year: explore
- Refresh your metrics and game video
- Compare your numbers with the benchmarks above and pick 2–3 things to improve
- Build a list of 25–40 schools by academics, location, size, cost and level
- Draft your intro email to coaches
- Clean up your social media
Junior year: execute
- Sort your list into reach, realistic and backup schools (20–30)
- Email coaches one at a time, written for that program and your position
- Track every email, reply and next step
- Choose camps and showcases by which coaches will attend
- Get updated video and verified metrics after the season
Senior year: decide and transition
- Compare offers and financial aid in writing
- Finish applications and eligibility steps on time
- Tell other coaches politely once you commit
- Build your college schedule and a monthly budget
How to Email a College Coach
- Write each email yourself, for that school. Mass emails get ignored.
- Include your name, grad year, position, high school and travel team, GPA, key metrics, upcoming schedule and a video link.
- Ask one specific question about their program.
- Follow up with real updates: new video, new metrics or a tournament schedule.
- Send a thank-you after every camp, call or visit.
Track everything: school, division, coach name and email, date contacted, follow-up sent, reply, video sent, visit, your interest (1–10), their interest (1–10) and next step. Diamond Edge members get our recruiting tracker template.
Get Ready for College Life
Recruiting is the start. Our 8-week College Readiness course covers time management, money management, mental wellness, digital reputation, nutrition and recovery, and independent living, so you show up on campus ready. Details are in the parent guide.
Frequently Asked Questions
How hard do I need to throw to pitch Division I baseball?
As a guideline, Division I pitchers sit at 84 mph or better consistently, with top arms up to 95 or more, plus command of at least three pitches. Division II pitchers are usually 82 to 90 mph, Division III and NAIA 77 to 82 mph, and junior college around 80 mph.
What pop time do college coaches want from a catcher?
About 1.95 seconds or faster for Division I, 2.0 or faster for Division II, 2.0 to 2.1 for Division III and NAIA, and 2.1 or faster for junior college. Coaches trust times verified by a neutral source.
What 60-yard dash time do college middle infielders need?
Roughly 6.5 to 6.8 seconds for Division I, 6.9 or faster for Division II, 7.0 or faster for Division III and NAIA, and 7.1 or faster for junior college, ideally verified by a third party.
What exit velocity do I need to play college baseball?
As a guideline, off a tee with a BBCOR bat: about 95 mph or more for top Division I programs, 90 or more for mid-major Division I, 85 or more for Division II and top junior colleges, and 80 or more for Division III and NAIA. In-game exit velocity usually runs 5 to 10 mph lower.
Can I email college coaches before they are allowed to contact me?
Yes. You can email coaches and send video at any age. Division I baseball coaches can’t reply until August 1 before your junior year and Division II coaches until June 15 after sophomore year, but they can still read your email and watch your video.
Start Your Recruiting Plan
Book a Diamond Edge recruiting consult or a player evaluation at Trugo16 Athletics, 146 Old Route 9, Suite 4, Fishkill, NY. Call 845-762-6919, email info@trugo16athletics.com, or schedule a player evaluation.
Next steps: College Baseball Recruiting Prep, 2027 high school tryout dates and winter training.